Form tie rods DG 15/17 made from mild steel and steel EN 8 are threaded along their entire length. Natural finish with anti rust coating. Core diameter = 15mm (outer diameter= 17mm). Weight 1.44 Kg/m
Plates are made from steel ST 37 to accommodate tie rods DG 15/17. To be used with wing nuts or hexagon nuts. For use in both timber and steel formwork.
This malleable cast iron - Grade BM 30- 06 Grey iron part is used together with tie rods DG 15/17 for the construction of watertight concrete walls. It is very often the case that customers demand the tie rods to be connected up to a so-called waterstop in the middle of the wall.
UNIPRO WaterStop is a specially formulated Polyvinyl Chloride (PVC) compound. Flexible, resilient, tough, chemically inert, is not affected by weathering, low temperatures, or constant immersion in water. It will withstand rough treatment during installation, yet is relatively easy to install and splice.
A natural choice in designing, building and constructing works including roads and highways; ground, drainage and filtration systems; hydraulic works, waste disposal sites and water purifying plants. Geotextile has been defined as - A permeable geosynthetic comprised solely of textiles.
EPOLY BOARD is extremely strong in puncture and injury resistance. It is engineered to resist puncture at over 1100, 1300, 1500, 2000, 24000 and 2600 Newton as per ASTM E-154. POLY BOARD differs from any other materials used to protect the waterproofing membrane as it enjoys flexibility which enables its use for tacking corners, protrusions, rounded surfaces and also uneven surfaces.
Manufactured from Pre-galvanized steel to BSEN 10327. Hy Rib is available using stainless steeI to BSEN 10088-2 type 1 .4301. The profile of Hy Rib open mesh in combination with its ribs provide an inherently stiff sheet along its length.It can be used for flat and curved surfaces.
Poliane is a polyethylene vapour barrier to alkalis, salts, acids and chemicals found in sub-soils. Fully stable and waterproof. Used as a vapour barrier and damp proof membrane in concrete slabs, floors, insulation boards shuttering , etc... For corrosion protection of water and oil pipelines. Protects from the sun, wind, rain, dust and damage.
Extruded polystyrene rigid foam with skin, colored blue throughout, according to ASTM standard C 578-95, as manufactured by Oriental Polystyrene (OriFoam). Material thickness should be as indicated in the drawing and have many good properties.
EEI Expanded Polystyrene is rigid and light - weighted. By controlling the density of expanding beads during the manufacturing process, EEI can custom produce insulation materials according to the specific requirements of customers applications.
UNIPRO Rockwool Blanket conforming to ASTM C-553 and ASTM C-665 is a lightly bonded insulating material available with or without facing. These products can be faced on one side or both sides to form a firm but flexible multi-purpose insulating materials.
UNIPRO Filler Boards is manufactured from highly resilient softwood fibers coated with bitumen. Filler Boards are dry and clean, and cannot extrude any form of staining matter. They are resistant to moisture penetration and ice formation in the joint. They are immune to dry and wet rot, fungus and most forms of insect attack or similar forms of deterioration.
Semi rigid expanded insulation cork boards are naturally dark in color and although designed for insulation purposes they do have multifunctional uses. The cork’s low thermal conductivity offers a high energy efficiency, thus contributing for an environmental and economic saving.
Info Under Construction
Poly TI is a high performance one part Polyurethane sealant weather-resistant, non-sagging, and water tight with excellent adhesion properties designed for use in all types of joints, vertically and horizontally. Poly TI has a movement capability of ±25% of the joint width, making it ideal for joints.
MARISEAL® 260 is a premium, liquid-applied, highly permanent elastic, cold applied and cold curing, one component polyurethane membrane used for long-lasting waterproofing.
The MARISEAL® 250 is the backbone of the MARISEAL® SYSTEM functioning as the main elastic and waterproofing membrane of the system. The MARISEAL® 250 is a one-component, liquid-applied, cold applied and cold curing, polyurethane coating that cures to a seamless, highly permanent elastic waterproofing membrane.
The MARISEAL® 400 is a pigmented, color- and UV-stable, highly permanent elastic, cold applied and cold curing, one component aliphatic polyurethane coating, used as a top-coat for protection over exposed, polyurethane waterproofing coatings.
MARISEAL® 600 is a fast-curing, liquid-applied, highly permanent elastic, cold applied and cold curing, bitumen extended, two component polyurethane membrane used for long-lasting waterproofing.
UNIPRO Closed-Cell Backer-Rod is a closed-cell, polyethylene foam joint filler and backing for elastomeric sealants. It's resilience accommodates dynamic joints.
Information Under Construction
NAMCODUCT® conduit pipes and fittings meet the requirements prescribed by the following standards organisations: SASO, BS, NEMA and ASTM. Our PVC pipe conduit range in straight runs of 2.9, 3, 6 meters are marked with standards specificatio requirements
Pipe Clamps and Hangers from SFSP used in the support of pipes and equipments are manufactured according to the highest standards of fabrication.A diversified choice of Pipe Hangers, Pipe Clamps, EMT Straps, Omega Clamps, Beam Clamps, J and U-Bolts and Threaded Accessories.
The durability and life of the chute depend on the quality of the plastic. Superchute® uses a high grade polyethlyene that is extremely resistant to abrasion and temperature extremes.
.jpg)
